Free shipping in 24/48h all over Europe
Use now the welcome discount code and get a 50% discount exclusively on your first order!
169,00€
All Orodent Zirconia discs are manufactured in Italy with 100% TOSOH powders and we guarantee free delivery in Europe in 24/48 hours.
Since 1984, a trusted partner for the supply of dental products
Dedicated customer care for pre- and post-sales zirconia support
Pay with utmost reliability and security, even in 3 convenient installments
We guarantee 24/48h delivery throughout Europe for all shipments
| Flexural strength | |
|---|---|
| Translucency | |
| Applications |
Single crowns, reduced bridges, full bridges up to 12 units (Toronto bridge) |
| Sintering | |
| Coloring liquids | |
| Category |
Thor multilayer Zirconia, thanks to the latest generation of TOSOH powders, is the ideal solution for all types of restorations with its high strength (1200 MPa) and high translucency (45%).
We use exclusively certified TOSOH powders because they guarantee the highest purity and the best manufacturing standards in terms of eco-friendliness, strength and aesthetics.
Orodent Thor 1200 MPa multilayer disc offers the highest flexural strength and an excellent natural aesthetics: it allows to make every kind of structure, from single crowns to full arch frameworks and restorations with gingival parts.
Orodent zirconia is pre-sintered at a low temperature in order to provide an easy-to-process material that wears tools down to a minimum, thus extending tools’ life.
Its 45% translucency guarantees an excellent aesthetic result in all shades.
The flexural strength of Orodent Thor is 1200 MPa across the whole height of the disc, ensuring maximum safety for any type of restoration.
Orodent Thor 1200 MPa is available in 14 shades and 7 heights. The Orodent Colorodent Gold and Supercolori lines also allow you to infiltrate and characterize all types of multilayer zirconia before sintering.
Orodent Thor 1200 MPa is designed and made with 4 layers of colour
and a single flexural strength of 1200 MPa from the neck to the enamel (cusp).
A: Enamel (cusp), B: Body, C: Neck
Orodent Multilayer Discs can be infiltrated and characterised with Colorodent Gold and SuperColori liquid lines. After sintering, the structure can be finalized using stains mixed with glaze.
In order to obtain the exact shade desired, it is necessary to consider that the result will depend above all on the thickness: the thicker the structure, the less translucent and bright it will be.
7 Thicknesses: 12,14,16,18,20,22,25 mm
Full elements will result more saturated, therefore in a darker colour. In these cases, we suggest to choose a less saturated shade than desired and finalize with stains after sintering.
Orodent Thor 1200 MPa is the ideal solution for all types of restorations. Based on your needs, you can choose a monolithic solution, cut-back technique or microstratification.
All Orodent discs, manufactured entirely in Castelnuovo del Garda, are pre-sintered at a low temperature for better workability.
Pre-sintering in this way allows to have the material in the chalky state (not vitrified) offering important advantages:
Sintering is the fundamental step in the entire process. It is during this phase that the zirconia acquires all its properties of translucency and flexural strength.
Orodent has developed 4 sintering programmes that must be chosen according to the thickness of the prosthesis, not on the type of zirconia: in particular, the heat treatment must guarantee homogeneous heating between the inner and outer layers of the prosthesis to obtain a uniform and three-dimensional shrinkage, paying particular attention to prostheses with elements of different thicknesses.
Our products are shipped and delivered in 24/48 hours throughout Europe.
Orodent S.r.l.from 1984
Email: sales@orodent.com
Phone: 045 645 0635
Take advantage of the special offer and use the discount code “WELCOME50” on your first order to get a 50% discount on your cart.
Take advantage of this special offer!
